Bearing Carriage PS 4-15
0.0.443.06

Bearing Carriage PS 4-15

0.0.443.06

CAD-data bekijken Aan vergelijkingslijst toewijzen Producten vergelijken https://nl-product.item24.com/nl/directlink/pro/44306
Speciale eigenschappen:
item-producten zijn gebaseerd op verschillende modulaire afmetingen en hun bijbehorende systeemroutines. Profielen uit de series 5, 6, 8, 10 en 12 hebben allemaal hun eigen bevestigingsmiddelen in bijbehorende maten nodig. De profielen van serie X komen overeen met de systeemroutine van lijn 8 maar hebben een specifiek plat oppervlak met minimale bochtdiameters waardoor ze ideaal zijn voor het vervaardigen van gesealde constructies.
Onderdelen die aan RoHS voldoen bevatten geen gevaarlijke stoffen zoals lood of cadmium. De EG-richtlijn 2002/95/EG (RoHS 1) stelt beperkingen aan het gebruik van bepaalde stoffen in elektrische en elektronische apparatuur. Dat geldt ook voor batterijen e.d.
Alle materialen zijn geregistreerd in overeenstemming met de REACH-regels. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) garandeert dat gebruikers over exacte informatie betreffende de soort en eigenschappen van de bedrijfsmiddelen, smeermiddelen enz. beschikken waarmee zij in aanraking kunnen komen.
Leveringseenheid
Schaalbegrenzing
Prijs
1 pce.
≥1
on application

on application

Meer productinformatie

  • Attributen
  • Details
  • Accessoires
  • Downloads
  • Classificatie
Bearing Carriage PS 4-15
0.0.443.06

Attributen

Line
line 8
Delivery unit
1 pce.
Weight
m = 140 g
ESD
ESD-safe = No
Velocity
vmax. = 5 m/s
Load Factor, dynamic
C = 7200 N
Load Factor, static
C0 = 14500 N
Bearing Carriage PS 4-15
0.0.443.06

Details

Housing, St, hardened
2 wipers, PA, black
2 lubricating nipples
Notes on Use and Installation
The Bearing Carriages can be used either individually or in various combinations on one or more rails.
The Bearing Carriage has four polished tracks on which the bearings are in linear rolling-ball contact with the profiled rail. The bearings are recirculated through the end-face reverse units and closed return conduits. The carriages are fitted with end-face wipers and additional longitudinal wipers in order to minimise sensitivity to external influences.
Profiles 8 can be secured to the Bearing Carriage by means of Button-Head Screws ISO 7380 and Locating Washers 8 (Section 3.2 Screws and Universal- Elements).
Guide rail PS 4-15 is attached to the Profile 8 groove. The rail has been shaped for this purpose and centres automatically when screwed against Groove Profile 8 Al M4-60.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.
*Note: Due to the fixing of the guide rail, the stated tensile forces of the linear guide system cannot be fully utilised in all directions.
*Note: Due to the fixing of the guide rail, the stated tensile forces of the linear guide system cannot be fully utilised in all directions.
The permissible load for a linear guide system depends on the load bearing capacity of the guide elements but also on the strength of the screw connections and the construction of the profile frame.
The minimum stroke length (hmin.) is required if the rolling-ball contact is to be adequately lubricated. The carriage is charged at the factory with lithium-based grease. Lithium-based grease with a mineral-oil base can be used for re-lubrication.
Given the contact pressure of the wipers, a displacement force of 10 N must be taken into account irrespective of the load.
Bearing Carriage PS 4-15
0.0.443.06

Accessoires/service

Linear Guide Rail PS 4-15
Leveringseenheid
cut-off max. 1900 mm
Artikelnr.
0.0.443.32
Groove Profile 8 Al M4-60, natural
Leveringseenheid
1 pce., length 2000 mm
Artikelnr.
0.0.443.02

Downloads

Assembly instruction(1 MB)
Bearing Carriage PS 4-15
0.0.443.06

Classificaties

Classificaties zijn industriële productnormen die naast andere zaken worden gebruikt voor een gestructureerde verwerking in ERP en e-business systemen. Hebt u de classificatiegegevens voor alle producten van item nodig voor uw elektronisch aankoopsysteem? Zo ja, aarzel dan niet en neem contact met ons op.
eCl@ss 11.0
23050701
eCl@ss 4.0
23050701
eCl@ss 4.1
23050701
eCl@ss 5.0
23050701
eCl@ss 5.1
23050701
eCl@ss 6.0.1
23050701
eCl@ss 7.1
23050701
eCl@ss 8.0
23050701
UNSPSC 7.0
31171506
UNSPSC 9.0
31171506
customs tariff number
84829900