Corner-Fastening Set Clamp-Profile 8 32x18
0.0.494.73

Corner-Fastening Set Clamp-Profile 8 32x18

0.0.494.73

CAD-data bekijken Aan vergelijkingslijst toewijzen Producten vergelijken https://nl-product.item24.com/nl/directlink/pro/49473
Speciale eigenschappen:
item-producten zijn gebaseerd op verschillende modulaire afmetingen en hun bijbehorende systeemroutines. Profielen uit de series 5, 6, 8, 10 en 12 hebben allemaal hun eigen bevestigingsmiddelen in bijbehorende maten nodig. De profielen van serie X komen overeen met de systeemroutine van lijn 8 maar hebben een specifiek plat oppervlak met minimale bochtdiameters waardoor ze ideaal zijn voor het vervaardigen van gesealde constructies.
Onderdelen die aan RoHS voldoen bevatten geen gevaarlijke stoffen zoals lood of cadmium. De EG-richtlijn 2002/95/EG (RoHS 1) stelt beperkingen aan het gebruik van bepaalde stoffen in elektrische en elektronische apparatuur. Dat geldt ook voor batterijen e.d.
Alle materialen zijn geregistreerd in overeenstemming met de REACH-regels. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) garandeert dat gebruikers over exacte informatie betreffende de soort en eigenschappen van de bedrijfsmiddelen, smeermiddelen enz. beschikken waarmee zij in aanraking kunnen komen.
Leveringseenheid
Schaalbegrenzing
Prijs
1 set
≥1
on application

on application

Meer productinformatie

  • Attributen
  • Details
  • Accessoires
  • Downloads
  • Classificatie
Corner-Fastening Set Clamp-Profile 8 32x18
0.0.494.73

Attributen

Line
line 8
Material
Die-cast zinc, white aluminium similar to RAL 9006
Delivery unit
1 set
Weight
m = 54.5 g
ESD
ESD-safe = No
Tightening torque, bright zinc-plated
Mbz-p = 4.5 Nm
Corner-Fastening Set Clamp-Profile 8 32x18
0.0.494.73

Details

2 Button-Head Screws ISO 7380-M5x16, St, bright zinc-plated
Corner-Fastening Set Clamp-Profile 8 32x18 is used for stable profile connections.
The rigid screw fastening to the end faces of the profiles being connected produces a frame that is ideal for use within lightweight enclosures and for door frames.
Corner-Fastening Set Clamp-Profile 8 32x18 contains all components required for a profile connection. An M5 thread must be tapped into the core bore of each Clamp Profile 8 32x18.
The Corner-Fastening Sets are multifunctional. They can be used in a variety of ways when used with special add-on elements:
- Roller Set 32x18 can be fitted directly into the corner fastener. This turns the frame into a smooth-running sliding door element that can be employed e.g. in the Sliding-Door Guide Profile 8 40x10.
- Hinge Sets 32x18 come with an insert for the corner fastener which forms a door hinge in conjunction with a hinge bearing in the frame of the surrounding construction. This provides an easy means of constructing a stylish, lightweight swing door with a particularly low door gap and without needing to fit additional hinges.
The maximum permissible weight of a door is 10 kg.
Sliding-Door Guide Profile 8 40x10 is fitted with Clip 8 St at the top and bottom of the surrounding profile frame. It forms the guide for two door leaves of Clamp Profile 8 32x18.
Spring-loaded Roller Set 32x18 is fitted into the corner fasteners of the previously constructed clamp profile frames. A Roller Set must be installed in each fastener so as to guide the sliding door leaf.
A limit stop can be installed to prevent the roller insert from springing. The corner fasteners at the bottom of a sliding door frame are always installed with rigid rollers. Spring-loaded rollers in the corner fasteners at the top enable the door leaves to be fitted into a profile frame which has already been built.
If required, all four roller inserts may be blocked by limit stop inserts and the outer profile frame finished after the sliding door leaves have been fitted. This effectively prevents the doors from being removed without dismantling the frame.
After the rollers have been fitted, a plastic end cap closes the fastener at the side and serves as a door stop in the terminal positions.
The sliding doors can also be run directly in the grooves of a Line 5 profile. This produces a particularly compact frame construction.
The hinge inserts are also fitted into the corner fasteners after the clamp profile frame has been closed.
A hinge bearing is attached to both the upper and the lower frame profile and functions as a rotary bearing for a door. During installation, the spring-loaded Hinge Pin engages in the bearing plate, whose position in the groove can be adjusted when the swing door is open. This provides an effective means of preventing a closed door from being dismantled.
The Hinge Sets for installing swing doors in frame constructions of Line 5 or 8 contain all the parts required for one hinge.
Folding-Door Hinge Al for Clamp Profile 8 32x18 is used to link together separate segments to create space-saving folding doors. Thanks to the Hinges, the moving elements fold up in a concertina formation.
Meer tonen
Corner-Fastening Set Clamp-Profile 8 32x18
0.0.494.73

Accessoires/service

Roller for Corner-Fastener 8 32x18
Leveringseenheid
1 set
Artikelnr.
0.0.494.74
Hinge 5 for Corner-Fastener 8 32x18
Leveringseenheid
1 set
Artikelnr.
0.0.495.33
Hinge 8 for Corner-Fastener 8 32x18
Leveringseenheid
1 set
Artikelnr.
0.0.494.76
Cap for Corner-Fastener 8 32x18, grey similar to RAL 7042
Leveringseenheid
1 pce.
Artikelnr.
0.0.494.71
T-Slot Slider 8 for Corner-Fastener 8 32x18, grey similar to RAL 7042
Leveringseenheid
1 pce.
Artikelnr.
0.0.685.48

Downloads

Assembly instruction(3 MB)
Corner-Fastening Set Clamp-Profile 8 32x18
0.0.494.73

Classificaties

Classificaties zijn industriële productnormen die naast andere zaken worden gebruikt voor een gestructureerde verwerking in ERP en e-business systemen. Hebt u de classificatiegegevens voor alle producten van item nodig voor uw elektronisch aankoopsysteem? Zo ja, aarzel dan niet en neem contact met ons op.
eCl@ss 11.0
23360290
eCl@ss 4.0
22041424
eCl@ss 4.1
22041424
eCl@ss 5.0
23250311
eCl@ss 5.1
23250311
eCl@ss 6.0.1
23250311
eCl@ss 7.1
23360290
eCl@ss 8.0
23360290
UNSPSC 7.0
30152001
UNSPSC 9.0
30152001
customs tariff number
83024200
Terug
Productwereld
Terug
Klantoplossingen
Terug
Over ons
Terug
Service
Terug
Shop
TerugHoofdmenu
MB-systeemmodule
TerugHoofdmenu
Automatisering
TerugHoofdmenu
Nieuwigheden
TerugHoofdmenu
Trainingen
Taal
X Menu sluiten